OD4mm 8K Surface 316l Stainless Steel Pipe Corrosion Resistance
Product Details
| Standard: | ASTM A213 ; ASTM A269 ; ASTM A312 ; EN10216-5 , Ect . | Ends: | Plain Or Beveled |
|---|---|---|---|
| Application: | Boiler&Heat Exchanger, Energy, Petrochemical, Mining, Food, Paper, Gas And Fluid Industry | Types: | Stainless Steel Pipes |
| OD: | Outdiameter4mm -101.6mm | Thickness: | 0.4mm-3.0mm |
| Highlight |
8K 316l stainless steel pipe,OD4mm 316l stainless steel pipe,8K Surface 316l tube |
||
Product Description
304L/316L Stainless Steel Pipe 2b Seamless Steel Mirror Ba Round Tube 6K 8K Surface
Stainless steel tube for heat exchanger,evaporater,boiler,condenser,muffler,cooler
Specifications:
1) Diameters: 4 - 76.2mm
2) W.T.: 0.4 - 2.5mm
3) Grades: 316L/304/304L/310S,etc.
4) standard:GB/ISO/EN/ASTM/JIS,etc.
5) application range:widely use in the foodstuff,medical equipment,power,boiler,cooler,auto,condenser etc.
6) packing: inner packing:1 pc/plastic bag;outer packing:bundles in weaving bags or in plywooden case.
| Chemical composition and mechanical properties of stainless steel coils | |||||||||
| Grade | Chemical Composition (%) | Mechanieal Performece | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Hardness | |
| 201 | ≤0.15 | ≤1.00 | 5.5/7.5 | ≤0.060 | ≤0.030 | 3.5/5.5 | 16.0/18.0 | - | HB≤241,HRB≤100, HV≤240 |
| 304 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8.0/11.0 | 18.00/20.00 | - | HB≤187,HRB≤90,HV≤200 |
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 | HB≤187, HRB≤90 HV≤200 |
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 | HB≤187, HRB≤90 HV≤200 |
| 410 | ≤0.15 | ≤1.00 | ≤1.25 | ≤0.060 | ≤0.030 | ≤0.060 | 11.5/13.5 | - | HB≤183, HRB≤88 HV≤200 |
| 430 | ≤0.12 | ≤1.00 | ≤1.25 | ≤0.040 | ≤0.03 | - | 16.00/18.00 | - | HB≤183, HRB≤88 HV≤200 |
| Commodity | ASTM SUS201 202 301 304 304L 316 316L Hardware Austial Stainless Steel Sheet |
| Thickness | 6mm-400mm |
| Width | 1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm, etc |
| Length | 2000mm-6000mm or as customer request |
| Standard | AISI, ASTM, EN, BS, GB, DIN, JIS, etc |
| Material | ASTM SUS201 202 301 304 304L 316 316L Hardware Austial Stainless Steel Sheet |
| Surface | 2B, BA, HL, 8K, No. 4, etc |
| Packaging | Standard export sea-worthy packing |
| Technique | Hot rolled / cold rolled |
| Delivery time | 10-30 days |
| Supply ability | 5000 tons/ month |
| Certification: | ISO9001: 2008 |
| Payment terms | 30% TT as deposit and the balance should be paid by L/C or against copy of B/L |
| Applications | Hot rolled Steel plate applies to construction field, ships building industry, petroleum and chemical industries, war and electricity industries, food processing and medical industry, boiler heat exchanger, machinery and hardware fields. |
| Advantages | Strong corrosion resistance and decorative effect; Excellent and high quality control; competitive price; Timely, reliable and efficient delivery; Customer service. Cheap, better, faster |
| Note | We can produce other standard as the customers' requirement |
The thick the deviation of admission( do not include the weld sew) in wall of the weld tube is for ruling the wall thick 10% of ±, but minimum admission deviation is the 0.02 mms of ±.
The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ±.
Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
The machine function sees the table 5
table 5
| Steel number | Card number | The heat handles Make degree |
The anti- pulls the strength MPa |
Accept defeat the strength MPa |
Extension rate% | Degree of hardnessHRB |
| 0Cr19N19 | 304 | ≥1010°C Nasty and cold |
≥520 | ≥205 | 40 | ≤90 |
| 00Cr19Ni11 | 304L | " " | ≥480 | ≥175 | 40 | ≤90 |
| 0Cr17Ni12M02 | 316 | " " | ≥520 | ≥205 | 40 | ≤90 |
| 0Cr17Ni14M02 | 316L | " " | ≥480 | ≥175 | 40 | ≤90 |
| 0Cr18Ni11Ti | 321 | ≥920°C Nasty and cold |
≥520 | ≥205 | 40 | ≤90 |
Product Highlights
304L/316L Stainless Steel Pipe 2b Seamless Steel Mirror Ba Round Tube 6K 8K Surface Stainless steel tube for heat exchanger,evaporater,boiler,condenser,muffler,cooler Specifications: 1) Diameters: 4 - 76.2mm 2) W.T.: 0.4 - 2.5mm 3) Grades: 316L/304/304L/310S,etc. 4) standard:GB/ISO/EN/ASTM/JIS,etc. ...
High Frequency Welding Customized Coal Fired Steam Boiler Parts Stack Economizer Coil
High Frequency Welding Customized Coal Fired Steam Boiler Parts Stack Economizer Coil Boiler economizer Boiler Economizer is the energy improving device that helps to reduce the cost of operation by saving the fuel. The economizer in Boiler tends to make the system more energy efficient. In boilers, economizers are generally designed to exchange heat with the fluid, generally water. The exhaust from the boilers is generally in the temperature range of 200°C – 250°C, so there
High Frequency Welding Boiler Spiral Fin Tube For Economizer Heat Transfer
High Frequency Welding Boiler Spiral Fin Tube For Economizer Heat Transfer Boiler economizer Boiler Economizer is the energy improving device that helps to reduce the cost of operation by saving the fuel. The economizer in Boiler tends to make the system more energy efficient. In boilers, economizers are generally designed to exchange heat with the fluid, generally water. The exhaust from the boilers is generally in the temperature range of 200°C – 250°C, so there are a huge
Heat Exchanger H Type Boiler Parts Tube For Utility Power Station Plant
High Efficient Heat Exchang H Type High Temperature Resistance Boiler Parts For Utility/Power Station Plant Product Introduce H-fin Tubes have two steel discs,with fluorescent tubes symmetrically welded together to form fins(fins of butterfly piece)creating a shape that looks somewhat like the letter"H",creating an efficient energy saving, extension heating surface.H-fin Tubes also have a high rate of fusion welds and weld tensile strength.H-fin Tube is assembled with the H
Extension Heating Surface Boiler Fin Tube For Industrial Power Plant Boiler
Energy Saving Extension Heating Surface Boiler Fin Tube For Industrial Power Plant Boiler Product Description H-fin Tubes have two steel discs,with fluorescent tubes symmetrically welded together to form fins(fins of butterfly piece)creating a shape that looks somewhat like the letter"H",creating an efficient energy saving, extension heating surface. H-fin Tubes also have a high rate of fusion welds and weld tensile strength.H-fin Tube is assembled with the H economizer,
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
